EU SHIPPING TO OVER 20 COUTRIES

Caxtool
Kategorije
Caxtool
  • Kategorije
    • Aluprofiles, accesories
    • Linear technology, smoot rods, linear guides
    • Rubber goods,edge protections
    • Screws
    • 3D printer parts
    • Filament
    • 3D Printers
    • Electronic parts
    • Openbuilds V-slot
    • Laser engraving/cutting machines
    • Extraction and cleaning equipment
Wemos Esp-Wroom-02 Motherboard D1 Mini WiFi Module ESP8266+18650 Battery Cover
Wemos Esp-Wroom-02 Motherboard D1 Mini WiFi Module ESP8266+18650 Battery Cover
28,94 €

(23,15 € + 25% VAT)

  1. Networks
  1. Electronic parts
  2. Modules
  3. Networks

Wemos Esp-Wroom-02 Motherboard D1 Mini WiFi Module ESP8266+18650 Battery Cover

Broj artikla: 
EHGS02406
Wemos Esp-Wroom-02 Motherboard D1 Mini WiFi Module ESP8266+18650 Battery Cover
28,94 €

(23,15 € + 25% VAT)

Article No.:
EHGS02406
Delivery time:
2-4 working days
Main stock
2 pcs
We deliver our products within 2-4 working days!
Pojedinosti


Specification:
Compatible with nodemcu 18650 charging system integration
The indicator LED (green means full red means charging) can be used while charging
Switch control power supply
SMT connector can be used for sleep mode · 1 additional LED programmable (gpio16)
0.5a charging current
1A output
Overcharge protection
Over discharge protection
10 digital pin read/write/interrupt/PWM/I2C/line support (except D0)
If the battery is in the wrong direction, the charging chip will be destroyed.

Features:
One AD inputs.
Micro USB inputs.
One programmable LED (D0).
AUTO PROGRAM circuit.ESP8266 (ESP-WROOM-02 With TELEC) is equivalent to the NodeMCU.
Analog Input (AD): Built-in dividing resistor (AD = 220K – ADC – 100K = GND).
There is a SOLDER terminal for SLEEP MODE.
Compatible With Arduino and NodeMCU.
Operation and charging are possible at the same time.
18650 charging circuit including the 5V boosting circuit with TP5410.
Overcharge protection, over-discharge protection built in.
LED: Red = Charging, Green = Full charging.
3000 mA 18650 It is possible to operate for more than 17 hours on a battery.
Integrated 18650 battery charging and discharging system.
One switch controls whether the 18650 battery is powered or not.
OLED’s SDA and SCL connected to the D1 pin and the D2 pin respectively.
The five buttons are controlled by FLASH, RESET, D5, D6, and D7 respectively.
The 5 Digital pins can configure the write/read/interrupt/PWM/I2C/one-wire supported separately.
Operation and NodeMCU consistent, adding a programmable LED, you can use GPIO16 to control, display 8266 running status and other functions.
Integrated OLED and five buttons, more convenient for development.
The design concept originates from the open source project NodeMCU, and the development board integrates 18650 charging and discharging systems with charging and discharging protection.
At the same time, an OLED and five directional buttons are integrated to facilitate the development.


Slični proizvodi
Korisnički račun
  • Prijava
  • Registracija
  • Moj profil
  • Košarica
  • Moji favoriti
Informacije
  • Uvjeti i odredbe
  • Pravila privatnosti
  • Return and Refund policy
  • Plaćanje
  • Dostava
  • Kontaktni podaci
  • Impressum
Caxtool Ltd.
  • Dorozsmai street 157., Szeged, 6791
  • +3662549908
  • info@caxtool.com
  • youtube

sixpayment
paypal
simplepay_hu_v2
  • Aluprofiles, accesories
  • Linear technology, smoot rods, linear guides
  • Rubber goods,edge protections
  • Screws
  • 3D printer parts
  • Filament
  • 3D Printers
  • Electronic parts
  • Openbuilds V-slot
  • Laser engraving/cutting machines
  • Extraction and cleaning equipment
Promjena jezika
  • en
  • hu
  • ro
  • sk
  • si
  • at
  • de
  • cz
  • hr
  • pl
  • nl
  • fr
  • dk
  • it
  • ie
  • es
  • gr
  • pt
  • fi
  • mt
Promijeni valutu
Prijava
Registracija
Postavke privatnosti
Naše web-mjesto koristi kolačiće nužne za osnovno funkcioniranje. Za dodatne značajke (marketing, analitika, personalizacija) možete omogućiti dodatne kolačiće. Više detalja potražite u Obavijesti o privatnosti.
Neophodni kolačići ključni su za osnovne funkcije web-mjesta i bez njih web-mjesto neće ispravno raditi. Ovi kolačići ne pohranjuju osobne podatke koji omogućuju identifikaciju.
Marketinške kolačiće koristimo za praćenje aktivnosti posjetitelja na web-mjestu. Cilj je prikazivati relevantne oglase pojedinačnim korisnicima (npr. putem Google Adsa i Facebook Adsa) te potaknuti angažman, čime naše web-mjesto postaje vrijednije.
Statistički kolačići pomažu vlasniku web-mjesta razumjeti kako posjetitelji koriste stranicu prikupljanjem i anonimnim izvještavanjem podataka.
Kolačići za personalizaciju omogućuju nam pamćenje informacija koje mijenjaju ponašanje ili izgled web-stranice.