Volcano - Starter Pack 12V 1.75mm Original E3D

The Volcano upgrade kit is the solution to slow printing. Boasting 3x the volumetric flow rate of the standard V6, Volcano enables you to print bigger and stronger parts, faster. If you've got a printer with a large build volume then a Volcano upgrade is a must-do. Choose from either our Starter Packs (1 x 0.8mm nozzle) or Eruption Packs (1 x 0.6mm, 0.8mm, 1mm and 1.2mm nozzles).

Faster:
Thanks to its larger melt zone, the Volcano upgrade enables users to print thicker and wider tracks which results in dramatically reduced print times.

Stronger:
In addition to reduced print time, the thick tracks printed by Volcano have greater interlayer adhesion and bond to one another with improved strength. Parts printed are extremely strong, less brittle and feel much more sturdy than standard prints.

Bigger:
With the print volumes increasing and interest of larger 3D printed items such as furniture and automotive parts, comes a requirement to decrease the overall print time. The Volcano heater block was designed to make printing large parts more efficient by allowing the use of larger nozzle sizes and higher volumetric flow rates.

Key features:
3x the volumetric flow rate of the V6 HotEnd
E3D Eco system compatible
Maximum printing temperature 285°C
All metal heatbreak

Volcano Starter Pack:
1 x V6 Universal Fixing Kit
1 x Thermistor Cartridge
1 x 30W Heater Cartridge
1 x Extension Wire (for thermistor)
1 x Ziptie
1 x Volcano Heater Block
1 x 0.80 mm Brass Volcano Nozzle

Fixings included with the Starter Pack:
2 x M3x10 Socket Dome Screw (for securing heater cartridge)
1 x M3x3 Socket Dome Screw
1 x M3 Washer (for securing heater cartridge)
4 x Plastfast30 3.0 X 16 Screws (for securing fan)
2 x M3 Grub Screws (for securing thermistor)
1 x 1.5 mm Hex Wrench
1 x 2 mm Hex Wrench