MK3 ALU-Heatbed

Detaljer

Specification:
Material: 3 mm aluminum. No need for glass plate, this is better for faster prints.
Copper on the board: 1 layer 35 μm
Dual power: 12V/24V
Mounting: 3 point, this makes the leveling easier. First level the side with 2 holes and fix in place, then level the side with one hole.
Resistance: 1.4-1.6 Ohm (12 V)
: 5-5.4 Ohm (24 V)
Time for heatup to 100 °C: 2 min.
Max. temperature: 180 °C

Lignende produkter